The screens range in size from 5′ x 16′ to 6′ x 20′, and are teamed with single or twin dewatering screws. The screens are outfitted with strategically placed nozzles to rines materials clean. High capacity dewatering screws deliver the fine aggregates while chutes and cross conveyors deliver the sized products. The portable chassis design is easy to transport to the desired site and easy to set up.
Contact Us For More Information
M 165S
FEATURES AND BENEFITS
- 16′ x 5′ (4.9m x 1.5m) portable incline screen with single screw wash plant
- 16′ x 5′ (4.9m x 1.5m) triple deck inclined two bearing screen
- Double axle suspension portable chassis using heavy-duty I-beam construction with four cribbing support legs and two manual landing jacks
- Under-screen fines collection flume with water spray system on all screen decks, flume and washout
- Heavy duty single 36″ x 25′ screw
- Manifold with valves and hoses
- Heavy duty discharge chute including a top deck over chute with discharge to the front of the plant; middle deck chute discharging to the side and bottom deck chute discharging to the opposite side
- Walkway access around three sides of the screen
M 165S
TRAVEL WIDTH | 3.4m (11′) |
TOTAL WEIGHT | 49,000 lbs |
KING PIN WEIGHT | 13,500 lbs |
TANDEM SUSPENSION WEIGHT | 35,500 lbs |
M 166S
FEATURES AND BENEFITS
- 16′ x 6′ (4.9m x 1.8m) portable incline screen with twin screw wash plant
- 16′ x 6′ (4.9m x 1.8m) triple deck inclined two bearing screen
- Double axle suspension portable chassis using heavy-duty I-beam construction with four cribbing support legs and two manual landing jacks
- Under-screen fines collection flume with water spray system on all screen decks, flume and washout
- Heavy duty twin 36″ x 25′ screw
- Manifold with valves and hoses
- Heavy duty discharge chute including a top deck over chute with discharge to the front of the plant; middle deck chute discharging to the side and bottom deck chute discharging to the opposite side
- Walkway access around three sides of the screen
M 166S
TRAVEL WIDTH | 3.6m (11′ 10″) |
TOTAL WEIGHT | 57,000 lbs |
KINGPIN WEIGHT | 20,000 lbs |
WEIGHT AT AXLES | 37,000 lbs |
M 206S
FEATURES AND BENEFITS
- 20′ x 6′ (6m x 1.8m) portable horizontal twin screw wash plant
- 0′ x 6′ (6m x 1.8m) triple shaft horizontal three deck screen with complete spray system
- Triple axle suspension portable chassis using heavy-duty I-beam construction with four cribbing support legs and two manual landing jacks
- Under-screen fines collection flume with splash-type spray system on all decks, flume and washout
- Heavy duty twin 36″ x 25′ screws
- Hinged slurry box with spray bar, manifold, valves and hoses
- Heavy duty discharge chute including a top deck over chute with discharge to the front of the plant; middle deck chute
- Walkway access around three sides of the screen
- Optional electrical switchgear is available
M 206S
TRAVEL HEIGHT | 4.5m (14’8″) |
TRAVEL WIDTH | 4m (13’1″) |
TRAVEL LENGTH | 14.2m (46’6″) |
KINGPIN WEIGHT | 20,750 lbs |
TRI-AXLE SUSPENSION WEIGHT | 46,000 lbs |
TOTAL WEIGHT | 69,750 lbs |
SAND SCREWS
Single and twin screw options for fines washing, classifying and dewatering materials
SW 100 / SW 200
FEATURES AND BENEFITS
The Terex® SW 100 Sandscrew is a single screw fine material washer/classifier/dewaterer. The recommended maximum material size is 3/8″ (10mm). The approximate capacity of the SW 100 Sandscrew is 50-100 TPH.
The Terex® SW 200 is a twin screw fine material waasher/classifier/dewaterer. The recommended maximum material size is 3/8″ (10mm). The approximate capacity of the SW 200 Sandscrew is 100-200 TPH.
SW 100 |
SW 200 |
|
CAPACITY | 50-100tph | 100-200tph |
MAXIMUM FEED SIZE | 3/8″ (10mm) | 3/8″ (10mm) |
WATER REQUIRED | 180-700 GPM (25 PSI) | 350-1250 GPM (25 PSI) |
SCREW DIAMETER | 0.9m (36″) | 0.9m (36″) |
TUB LENGTH | 7.6m (25′) | 7.6m (25′) |
SCREW SPEED | 21rpm | 21rpm |
MOTOR RECOMMENDATION | 15hp/1800rpm | 2 x 15hp/1800rpm |
DRIVE SHEAVE | 3B-60 | 3B-60 |
V BELTS | (3), B98 | 2 x (3), B98 |
WEIGHT OF WASHER | 14,500lbs | 25,500lbs |
LOADED WEIGHT | 31,400lbs | 61,800lbs |
SLOPE OF MACHINE | 18° | 18° |