M 390 Washplant

The Terex® M 390 Washplant is a high capacity mobile washing unit that has been engineered for quick installation and ease of relocation making it ideal for applications including sand, gravel, coal and crushed stone. The M 390 Rinser includes a feed hopper complete with reject grid, feed conveyor, washing screen, fully enclosed power unit, twin break and suspended axles, hydraulic jacking legs, king pin towing facility and site drawbar.

Contact Us For More Information

FEATURES AND BENEFITS

• Deutz air-cooled engine (71hp/53kW)
• 1 x T 150 / T 200 and 2 x T 5032 stockpiler drive facility (NOT Standard on Electric/Hydraulic Machines)
• 1050mm wide variable speed belt feeder (no deflector doors fitted)
• 8.0m hopper (10.5cu. yards) -14′
• 100mm remote control hydraulic tipping reject grid 4.25m (14′) complete with grouser bars
• 3.7m x 1.5m (12′ x 5′) double deck washing screen (12′ x 5′ on both decks)
• Washbox complete with 5 adjustable water jets at main conveyor discharge
• Total 17 washing spray bars fitted to both decks
• Screen box reject chutes lined with replaceable steel liners
• Sand water collection hopper (single product) complete with 6m standard open troughing
• 1m (3’3″) wide main belt
• Polyurethane teardrop profile belt scraper fitted at drive drum
• Skirting on main conveyor & steel water supply pipe up one side
• Twin braked and suspended axles
• Hydraulic jacking legs, King pin towing facility & site drawbar
• Guards designed to comply with Machinery Directive
• Rated @ 2 bar pressure at spray nozzles
• 2 deck machine can be transported Ro-Ro. 3 deck machine requires the screenbox to be transported separately

OPTIONS

• Electric/hydraulic drive – (37kW) (No coupling facility) (not including electric control panel)
• Electric/hydraulic drive – (37kW + 18.5kW) complete with 1 x T 150 / T 200, 2 x TC 5032 stockpiler drive facility (not including electric control panel)
• Deutz Water Cooled Engine (100hp/75kW) complete with 1 x T 150 / T 200 and 4 x stockpiler drive facility
• No grid but hopper deadplate fitted
• 4″ double deck vibrating grid complete with abrasion resistant plate on wear surface of T Bars top deck and mesh in bottom deck and Deutz water cooled engine (100hp/75kW)
• 20mm thick rubber lining of standard stone chute (price per deck)
• 6mm thick rubber lined sand box (single product)
• Side tensioned rubber mats top deck of screen
• End tensioned rubber mats bottom deck of screen
• End tensioned rubber mats middle deck of screen (3 deck only)
• Hydraulic tensioning (bottom deck screen mesh)
• 3-deck screen box (3.7m x 1.5m – 12′ x 5′) complete with spray bars & chutes (may be separate load)
• Catwalk on 1 x side of std conveyor and 2 x side of screen box with 1 set of access steps and 1 access ladder
• Catwalk 2 sides of standard conveyor & 2 sides of screenbox with 2 sets of access steps
• 3.2m extension on main conveyor
• Dust covers on main belt
• Light board
• Hydraulic jacking legs at screen box end
• Twin product sand box (unlined/lined)
• Fresh water 6″ in line strainer “Y” type
• Top Deck Polymodule Frame complete with Polymodules (Price dependent on aperture)
• Middle Deck Polymodule Frame complete with Polymodules (3-Deck Only) (Price dependent on aperture)
• Bottom Deck Polymodule Frame complete with Polymodules (Price dependent on aperture)

M 390