The Terex® FM Superfines Range is a static fines recovery unit.
It brings together on one chassis, centrifugal slurry pump, four hydrocyclones, a collection tank and a 12 x 5 or 14 x 6 dewatering screen. It can produce one grade of sand classifying at approximately 40 micron and is designed to work in conjunction with the Terex Washing range.
Contact Us For More Information
FEATURES & BENEFITS
- Maximum recovery of material above 40μm (400 mesh)
- Removes silt, slimes and clays below 40μm (400 mesh)
- Removes water following dewatering operation to 10-15% of residual water content
- Major reduction in fine material discharging to the water management system, thus reducing recovery cycle and saving money
- Heavy-duty robust construction ideal for rugged operating environment
- Low maintenance
- All wear areas rubber lined
- Walkway and access steps
- Quick assembly time
- Centrifugal slurry pump
- High frequency 12 x 4 or 14 x 6 dewatering screen fitted with polyurethane modular mats
- Four rubber lined G4 Hydrocyclones which classifies at approximately 40μm (400 mesh) (Depending on feed gradation)
- Self-regulating cyclone tank complete with built in float system
OPTIONS
- Boiler box for dry feed
- Electrical control panel
- Spraybars on dewatering screens
FM 120 BW STATIC
WORKING LENGTH | 7.80m (22′ 6″) |
WORKING WIDTH (INC WALKWAY) | 4.4m (14′ 4″) |
WORKING HEIGHT | 5.35m (17′ 5″) |
FEED HEIGHT | 2.30m (7′ 5″) |
PRODUCT DISCHARGE | 1.26m (4′ 2″) |
WASTE WATER DISCHARGE | 0.81m (2′ 9″) |
TOTAL WEIGHT (EMPTY) | 15000kg (33000lb) |
TOTAL WEIGHT (WORKING) | 22800kg (50000lb) |
FM 200 SUPERFINES
WEIGHT | 18.500kg (40.700lbs) |
WORKING WIDTH (INC WALKWAY) | 4.6m (15′ 1″) |
WORKING LENGTH | 8.6m (28′ 2″) |
WORKING HEIGHT | 7.3m (24′) |
FEED HEIGHT | 3.1m (10′ 2″) |
PRODUCT DISCHARGE | 1.70m (5′ 5″) |
WASTE WATER DISCHARGE | 1.15m (3′ 10″) |